- 27 -
• FUNCTION: this is the function used for dynamic zeroing.
• S
TATIC: the zero is acquired at the STOP
• MAX: the zero is acquired at the point that corresponds to the dynamic ma-
ximum between S
TART and STOP
• MIN: the zero is acquired at the point that corresponds to the dynamic mini-
mum determined between S
TART and STOP
• (MAX+MIN)/2: the zero is acquired at the arithmetic mean point, determined
between S
TART and STOP.
3.1.3 Serial number TAB
At last type in the SERIAL NUMBER of the master and, if it is necessary, a MESSAGE for
prompting the operator.
To Next Page
Loading...