133
Controls in detail
Seats
Rear seat adjustment (Maybach 62)
i To adjust settings for the right rear pas-
senger seat, make sure the right rear passen-
ger seat adjustment button is selected
(컄 page 135).
i The memory function (컄 page 140) lets
you store settings for the seat positions.
! When moving the seat, make sure there
are no items in the footwell or behind the
seats. Otherwise you could damage the seats.
i The rear center seat* cannot be adjusted.
1 Fully reclined position
2 Upright position
3 Head restraint height
4 Head restraint tilt
5 Seat backrest tilt
6 Seat cushion depth
7 Seat cushion tilt
8 Seat fore and aft adjustment
9 Leg rest length
a Leg rest tilt
왘 Switch on the ignition (컄 page 60).
or
왘 Open the respective door.
Fully reclined/upright position
왘 To adjust seat to fully reclined posi-
tion, press switch 1.
왘 Press and hold switch 1 until seat is
in desired position.
To stop the seat adjustment proce-
dure, release switch 1.
왘 To adjust seat to upright position,
press switch 2.
왘 Press and hold switch 2 until seat is
in desired position.
To stop the seat adjustment proce-
dure, release switch 2.
Head restraint height
왘 Press switch up or down in direction
of arrow 3.
Head restraint tilt
왘 Press switch forward or backward in
direction of arrow 4 (컄 page 133).
Seat backrest tilt
왘 Press switch forward or backward in
direction of arrow 5 until your arms
are slightly angled when holding the
steering wheel.
i The functions for adjusting backrest tilt
and seat fore and aft are linked functions.
When the seat is adjusted fore and aft, the
backrest tilt is adjusted simultaneously, and
vice versa.
컄컄
To Next Page
Loading...
