2-1
Remove parts bag from dryer drum. Check
that all parts were included.
Foot boot (4)
Dryer foot (4)
Coin sensor (2) PD only
International power cord connectors
(Gas only)
•
•
•
•
Gather the required tools and parts before
starting installation. Read and follow the
instructions provided with any tools listed
here.
8” or 10” Pipe wrench
8” or 10” adjustable wrench
that opens to 1” (2.5 cm)
Flat-blade screwdriver
Star head screwdriver
T-20 Security screwdriver or bit
Level
1/4” & 5⁄16” sockets with wrench
Utility knife
Pipe-joint compound resistant to type of gas
used.
Caulking gun and caulk
(for installing new exhaust vent)
Pliers
•
•
•
•
•
•
•
•
•
•
•
For complete installation instructions
go to the Document Links Page .
To Next Page
