Maytag MDE25PN - Remove Metercase

4-34
Electrical Shock Hazard
Disconnect power before servicing.
Replace all parts and panels before
operating.
Failure to do so can result in death or
electrical shock.
Remove coin box.
Remove two 1/2” hex head bolts below coin
box in the front of the metercase.
Remove service access door on top rear of
metercase.
Remove two 1/2” hex head bolts from inside
the service access area at the base of
the metercase. (See photo at top of next
column)
1.
2.
3.
4.

Two 1/2” Hex
Head Bolts
Lift metercase off the top of the dryer.
Remove metercase pad by lifting it off the
top of the dryer.
5.
6.
Metercase
Pad
Two 1/2” Hex
Head Bolts