Melco Bravo - Page 11

11 of 271
Scope of Manual
This technical manual is a guide to performing repairs and adjustments that go beyond routine operator
maintenance.
Although these procedures are best understood and performed by professional service technicians in
conjunction with specic factory technical training, much of the information in this manual is a useful
reference for others who might possess appropriate technical aptitude and skills.
•
Note: This manual is written for individuals with adequate knowledge, Melco certied training
or equivalent and experience in the use of tools required. No attempt is made to explain how
to use tools required to make repairs to the machine other than graphical depictions within the
procedures involved.
This technical manual species that certain functions are to be performed only by authorized service tech-
nicians. This is because specialized training and/or special tools or xtures are required in order to per-
form the function correctly. Performing repairs to the machine may result in damaged components, poor
machine performance, and potential injury to the technician or operator.
If you do not fully understand any information in this manual, contact technical support for assistance
before performing the procedure. The technical support staff are professional service technicians trained
on this equipment. They have acquired technical expertise through experience and technical training.
Additionally, certied equipment technicians routinely receive up to date servicing information to further
enhance their product knowledge.
This technical manual is presented in six sections:
1. Introduction to the manual and various service requirements
2. General information and specications containing all of the engineering settings and specications
you need to know when adjusting the machine
3. Lubrication schedules and procedures
4. Service and repair - detailed instructions to service and repair the machine
5. Options - maintenance and repair of optional equipment
6. Troubleshooting - a troubleshooting guide for problems commonly encountered with the machine.
Table of Contents