30 of 271
LED Indicator
The Status Indicator LED is illuminated when the machine is turned ON.
The LED color and whether it is blinking indicates the machine status or if it has a fault.
Status Light Condition Denition Action to Take
Green (blinking) Machine is on, but no RSA les
loaded yet
Start software, check connections
Green (continuous) Machine is on and ready for
operation
Red (blinking slow) Indicates a thread break Re-thread the needle with thread
break
Red (blinking fast) Indicates the machine has run
out of bobbin thread
Replace the bobbin
Red (continuous) Indicates the machine is in E-Stop
engaged mode
Release the red emergency stop
button
To Next Page
Loading...
