60 of 271
44. Inspect the roller for wear, nicks, or grooves that may catch thread. If the roller is damaged, re-
place it with a new one.
45. Using EMB Polymer grease, apply a small amount of grease to the lever hub as shown in the
image.
46. Using EMB Polymer grease, apply a tiny amount of grease to the outer surface of one (1) of the
three (3) small pegs inside the pinch roller as shown in the image.
47. With one lever up and one lever down, hold the pinch lever at an angle and slide it back into
place.
48. Rock it back onto the hub and slowly rotate to begin spreading the grease evenly around the hub.
49. Snap the roller back onto the hub and spin the roller to ensure that it is locked into place and the
grease is spreading evenly.
50. If you moved the threads originally, move them back into place.
51. Align the threads onto the v-notch in the front cover and lower thread feed levers.
This completes the quarterly maintenance procedure.
To Next Page
Loading...
