5-88 Microtek User's Guide for Windows
The New button
The New button lets you create a new scan job; the new scan
job will have default settings. This feature allows you to
create as many scan jobs as you wish, and each scan job can
then have its own settings. The notes below will illustrate this
more clearly.
In the following example, we will use a single image and then
divide it into two parts: the left half of the image will com-
prise one scan job and will be in color; the other half of the
image will make up the second scan job and will be in
grayscale.
To use the New button:
1 Click on the Preview button to see a preliminary view of
the image.
2 When the preview image appears, draw a scan frame that
covers the left half of the image. At this time, your scan
job area shows the title of the current scan job (Default
Scan #1). Make sure the image type selected (in the
Settings window) for this scan job is Millions of colors.
Scan frame around
left half of image. This
corresponds to the
current scan job in
Scan Job window.
A scan frame may already
be present after you click
on the Preview button and
the preview image
appears.
You can then simply grab
one of the corners of the
scan frame and drag
towards the left to form
the scan frame described
above. If you find this
difficult, you can also click
on the Scan Frame tool
and redraw the frame.
Both methods will work.
Note
To Next Page
Loading...
Need help?
General