Microtek ScanMaker IIG User Manual

2-33Hardware Installation
ScanMaker 35t Plus Specifications
Media:
Color and black-and-white slides and
negatives
Image Sensor:
Linear array CCD with daylight fluorescent
lamp.
Scanning Modes:
30-bit color internal process (24-bit color
external process);
10-bit grayscale internal process (8-bit
grayscale external process);
1-bit black and white; 12 built-in halftones.
Scanning Area:
35 mm (+/- 1.5 mm) x 35 mm
2686 x 2686 pixels
Maximum Resolution:
Original:
1950 x 3900 pixels
Interpolated:
3900 x 3900 pixels
Image Controls
Brightness Settings:
From -18% to +700% in 240 levels; each
step at 3% increments.
Contrast Settings:
From -42% to +49% in 14 increments; each
step at 7%.
Resolution Settings:
From 25 % to 100% in 1% per step in gray-
scale and color modes (software definable).
Scanning Speed (35 mm/line):
2.8 milliseconds to 64 milliseconds per line
(depending on the scanner settings)
Scanning times vary greatly, depending on
image dimensions, resolution, memory
capacity, disk access speed, and display
time.
Interface:
Adaptec AVA-1502E SCSI interface card
Voltage:
AC 100V to 120V (North America)
AC 200V to 240V (Europe)
Power Consumption:
AC 100V to 120V: 1.0 A Max.
AC 200V to 240V: 0.5 A Max.
Dimensions (L x W x H):
9.84" x 7" x 5.1"
Environment:
Operating temperature:
10° to 40°C ( 50° to 104°F)
Storage temperature:
-10° to 60°C ( 14° to 140°F)
Relative humidity: 20% to 80%

Microtek ScanMaker IIG Specifications

General

Brand	Microtek
Model	ScanMaker IIG
Category	Scanner
Language	English