Microtek ScanMaker IIG User Manual

2-56 Microtek User's Guide for Windows
ScanMaker 45t Specifications
Media:
Transparency color or black-and-white
originals.
Image Sensor:
Linear array CCD with daylight fluorescent
lamp.
Scanning Modes:
Single scanning pass; 36-bit color; 12-bit
grayscale.
Scan Frame:
Standard film holder
• 4" x 5" (without film mount):
3.68" x 4.44"
• 60 mm x 60 mm film mount #1:
55 mm x 55 mm
• 60 mm x 70 mm film mount #2:
55 mm x 68 mm
• 35 mm x 35 mm film mount #3:
34 mm x 34 mm
Glass film holder: 5" x 5"
Maximum Document Size:
5" x 5" (128 mm x 128 mm)
Optical Resolution:
1000 dpi horiz. x 1000 dpi vert.
Interpolated Resolution:
2000 dpi horiz. x 2000 dpi vert.
Scan Frame Selections:
From 1/8" to 5" in 1/8"- or 1-pixel
increments.
Image Controls Brightness Settings:
From -100% to +100% in 201 increments.
Contrast Settings:
From -42% to +252% in 42 increments.
Resolution Settings:
Form 1% to 100% in 1% steps in
grayscale and color modes (software
definable).
Scanning Speed:
5 milliseconds to 250 milliseconds per line
(depending on the scanner settings).
Interface:
Adaptec AVA-1502E SCSI interface card
Voltage:
AC 100V to 120V (North America)
AC 100V to 240V (Europe)
Power Consumption:
AC 100 V to 120 V: 1.3 A Maximum
AC 100 V to 240 V: 0.8 A Maximum
47 to 63 Hz
Dimensions (L x W X H):
20.5" x 14" x 6.6"
(520 mm x 355 mm x 168 mm)
Weight:
22 lb. (10 kg.)
Acoustic Noise:
55 dB(A) Maximum
Environment:
Operating temperature:
10° to 40°C (50°F to 104°F)
Storage temperature:
-10° to 60°C (14° to 140°F)
Relative humidity: 20% to 80%

Microtek ScanMaker IIG Specifications

General

Brand	Microtek
Model	ScanMaker IIG
Category	Scanner
Language	English