Microtek ScanMaker IIG - Using the Scanner Test Utility

Appendix C
The Scanner Test is a utility included with ScanWizard for Windows that
allows you to verify if your scanner has been properly set up and connected to
your PC.
To start up the Scanner Test utility:
For Windows 95: To start up the Quick Panel, click on the Start button to
select Programs, Microtek ScanWizard for Windows 95, and Quick Panel.
For Windows 3.1x: Go to the ScanWizard window in Program Manager, and
double-click on the Scanner Test icon.
Using the Scanner Test Utility
When started up successfully, the screen below appears.
Double-click
on this icon