Hardware Installation 2-11
Operating the scanner...
Positioning a document
1 Lift the scanner cover.
2 Place the document face down on the scanner glass. The top
left corner of the document (when the document is held
upright for normal reading) should be at the “0,0” position on
the ruler guides running alongside the scanner glass.
Scanning thick documents
1 Lift the scanner cover high enough so that there is enough
room to place the document on the scanner glass.
2 Lower the scanner cover. You are now ready to start scanning.
Lay thick document on
the scanner
LIft scanner cover
To Next Page
Loading...
