Microtek ScanMaker IIG User Manual

5-91Reference: The Scan Job Window
6 To see how the scan jobs relate to the titles in the Scan
Job window, try this.
• Click on the first scan job title. The scan job that
becomes active will be the left half of the image (in
color). In the Scan Job window, the title will be
highlighted, indicating that it is the current scan job.
• Click on the second title, and the second scan job is
activated (upper right-hand part of image, in gray-
scale). The second title will now be highlighted
because it will be the current scan job.
Clicking on the first title activates the
first image. Clicking on the second title
will activate the second image.
First scan
job (color)
Second
scan job
(grayscale)
7 To designate the scan job to be processed and scanned,
select the scan job and click on the Check button. The
checked scan job(s) will then be scanned in the order that
they appear in the Scan Job window, and they will be
delivered separately to your image-editing software.
Note: To check or uncheck a scan job, select the scan job,
then hold down the Shift key and click on the mouse.

Microtek ScanMaker IIG Specifications

General

Brand	Microtek
Model	ScanMaker IIG
Category	Scanner
Language	English