D-5Appendix D: The Quick Panel Utility
The Action
Buttons
Click on the Update button if you have changed a parameter for any
of the icons. This will update the information in the Quick Panel and
save the new information.
Click on the Close button to exit the Command Wizard. If you changed a
parameter for any of the icons, a message will appear asking you to
confirm and save the changes, or to abandon all modifications.
Using the Action Buttons
Click on the Duplicate button to make a duplicate icon for the Quick
Panel. For instance, duplicating the Copy icon will have the effect of
creating two Copy icons in the Quick Panel.
To use the Duplicate button:
1 Click on any icon while in the Command Wizard dialog box.
2 Click on the Duplicate button. Give a new name in the Title
box to the duplicate icon. For instance, if you are duplicating
the Copy icon, you can name the duplicate icon Copy 2.
3 Click on the Close button. The new duplicate icon then
appears in the Quick Panel.
The Action Buttons
are located on the
right side of the
Command Wizard
dialog box and
carry out a specific
action when you
click on them.
Below are more
details.
Update
Duplicate
Close
Click on the Delete icon to delete any of the duplicate icons that have
been created. You cannot delete the main command icons (the original
Copy, Fax, Disk File, Clipboard, and Application icons).
To use the Delete button:
1 Choose the duplicate icon to be deleted. You may have to
scroll down the toolbar to see the duplicate icons (they
come after the Application icon).
2 Click on the Delete button.
3 Click on the Close button. The selected duplicate icon is
deleted from the Quick Panel.
Delete
To Next Page
Loading...
