G-2 Microtek User's Guide for Windows
Appendix G: If you have an ASPI card
Cabling continued...
SCSI device
SCSI peripheral cable
PC SCSI cable
terminator
scanner
Connecting two SCSI devices to your PC and scanner.
SCSI devices
PC
scanner
Connecting a Microtek scanner to a non-Microtek SCSI peripheral
(like a CD-ROM drive, tape drive, optical disk drive). The non-
Microtek SCSI peripheral has two 50-pin Centronics ports. In this
case, you will need a SCSI peripheral cable (see Note below).
Case 2
Case 3
SCSI peripheral cables and terminators are not included with your Microtek
scanner but can be obtained from any computer reseller. For your SCSI peripheral
cable, use cables no longer than 4 feet; longer cables may cause SCSI-related
problems.The use of terminators is explained more fully in the next section,
Using
Terminator
s.
Note:
To Next Page
Loading...
