Microtek ScanMaker IIG User Manual

2-52 Microtek User's Guide for Windows
• To scan mounted slides
(If the thickness of the slide is about the same as the
thickness of the Microtek slide mount)
Place the mounted slide in film mount #3. Secure the film
under the clips of the film mount to lock the slide in.
THIS SIDE UP
AB
THIS SIDE UP
AB
Mounted slide
Film mount #3
• To scan mounted slides (If the thickness of the slide is
thinner than the Microtek slide mount)
Place the metal slide spacer beneath the clips of film mount #3,
then push the mounted slide under the clips to lock the slide
in.
THIS SIDE UP
THIS SIDE UP
AB
AB
Metal slide spacer
Mounted slide
Film mount #3
3 Place film mount #3 inside the standard film holder, and rest
the upper and left edges of the film adapter against the three
guide pins for positioning.
Be careful that the guide pins do not puncture the film when
you place the film inside the film holder.

Microtek ScanMaker IIG Specifications

General

Brand	Microtek
Model	ScanMaker IIG
Category	Scanner
Language	English