MICROTRONIX Access 1000 - 16 Specifications; Hardware and Interfaces; Enclosure; System

Microtronix Access User Guide
16 Specifications
16.1 Hardware and Interfaces
16.1.1 Enclosure
● Model 1000 dimensions: 0.0 x 0.0 x 0.0 cm (3.34 x 5.625 x 1.25”), 0.22 kg (0.5 lb)
● Model 4002 dimensions: 14.0 x 18.5 x 4.0 cm (5.5 x 7.25 x 1.6 “), 0.64 kg (1.4 lb)
● Model 4002-RM dimensions: 13.7 x 35.6 x 4.4 cm (5.4 x 14 x 1.72 “), 1.81kg (4 lb)
16.1.2 System
● Model 1000: MPC880 processor @132MHz
● Model 4002: MPC885 processor @132MHz
● 32MB SDRAM memory
● 16MB Flash memory
● CMOS real time clock on Access 4000
● 12VDC or -48VDC power connector
16.1.3 Ethernet Interface
● 10/100BASE-T
● RJ45 connector
● auto-detection
16.1.4 USB Interface
● USB 1.1
● Type A host port connector
16.1.5 WAN Interface
● DB25F DCE connector
● multi-protocol (software selectable): RS530[a], RS232/V.24, V.35, X.21, RS449/V.36
● source or receive signal clocks (software selectable)
● asynchronous speeds: 300 to 115200 bps
● synchronous speeds: 1200 bps to 10 Mbps; 1 input clock signal, 1 bi-directional clock signal
● output modem control signals: DSR, CD, CTS
● input modem control signals: DTR, RTS
16.1.6 Serial Interface (on USB adapter)
● DB9M (DE9M) DTE connector
● RS232 / EIA-574
116