MICROTRONIX Access 1000 - Switch Interfaces Configuration

Microtronix Access User Guide
9.4.3 Switch Interfaces Configuration
Incoming MWI messages from UMS and/or VMS systems may be converted to legacy SMDI or NEC
MCI, or to VoIP SIP. The MWI messages can be directed to a single switch or PBX, or routed to
multiple switches and PBX's via DN (Directory Number) using a self-learning DN database.
Configuration of up to 10 destination switches is accomplished by selecting a protocol, and configuring
the IP address and TCP port number of the internal Terminal Server, external terminal server, external
SMDI Translator, or PBX.
From the main menu MWI Gateway section, select Switch Interfaces to display the configuration form,
and table of switch interfaces.
79