Microtronix Access User Guide
To configure a VMS SMDI interface:
1) Select SMDI protocol. To disable the interface, set protocol to Disabled.
2) If initiating a connection towards the VMS, specify the IP address and TCP port number of the
remote or local terminal server that corresponds to the serial link of the VMS. If accepting
connections from any source, leave the IP field blank to listen for a connection. Selecting TCP
port 0 also disables this interface.
3) Click the Apply button to commit changes made.
The Status and Statistics field is a link that displays the current running status of the corresponding
application with a red or green indicator. Clicking the link will display the application status and SMDI
message statistics.
For additional configuration information, click on the Help button.
78
To Next Page
Loading...
