MICROTRONIX Access 1000 - Serial Via Internal Terminal Server

Microtronix Access User Guide
9.4.3.1 Serial Via Internal Terminal Server
Select an interface number by clicking it's Select to edit button to display it's configuration in the form.
Select the protocol SMDI or NEC MCI to match the switch interface.
To initiate a connection to the internal Terminal Server's serial interface, choose the local IP address
(127.0.0.1) and port number associated with the Terminal Server serial interface connected to the
switch. The Terminal Server Remote IP address should be set to 0.0.0.0 to listen.
To accept a connection from the terminal server, set the IP Address to 0.0.0.0. The Terminal Server
Remote IP address should be set to 127.0.0.0 to initiate the connection.
Click the Apply button.
81