Microtronix Access User Guide
7.4.3 X.25 Status
The X.25 Status table provides information and state of the X.25 interfaces. The following table
provides the description of each column.
X.25 Status
Parameter Description
Interface Interface(s) that are currently being used for X.25.
WAN 0 (hdlc0)
WAN 1 (hdlc1)
Mode The current emulation mode of the X.25 packet layer:
DTE - Data Terminating Equipment (terminal emulation)
DCE -Data Connecting Equipment (network emulation)
RAW - Transparent LAPB interface – reference is LCI 1
State The current state of the X.25 device. States include:
Not Ready – lower level is down
r1: Ready – Packet Control Ready
r2 – DTE Restart Request
r3 – DCE Restart Indication
Timer The remaining time of the outstanding Restart Request Timer before retransmission.
59
To Next Page
Loading...
