Microtronix Access User Guide
4 System Configuration
This section allows general configuration and administration of the system. Click on each item in the
System section of the main menu to display and modify system parameters.
4.1 Date and Time
The Date and Time page displays the current time and date for the time zone configured. Time, date,
and time zone may be changed. For synchronized time, an NTP server should be configured.
4.1.1 Date and Time Setup
To modify the date, time of day, and time zone, select the relevant Change box and use the drop down
menus to select the correct values.
4.1.2 NTP Server
To use an NTP (Network Time Protocol) server to synchronize the correct time, select the Use NTP
box, and enter the desired NTP server address. A DNS server will need to be configured in the
Ethernet Configuration section if a domain name is used.
To apply changes, click the Apply button. Changes will take effect immediately.
23
To Next Page
Loading...
