DICOM 10-11
(2) Set a default storage server:
a) Enter “[Setup] → [DICOM Preset] → [Set DICOM Service]”.
b) Select a storage server in the Service List and click [Default]; you can see “Y” is
marked in the Default column.
c) Click [Exit] to exit the page and return to Setup menu, then click [Save] on the
Setup menu to make the preset to take effect.
(3) Press the key to send DICOM storage.
10.3.2 DICOM Print
DICOM Print is used to send image(s) to DICOM print server to print images.
◼ Print image in iStation/Review/main screens
(1) Select image(s), operations are the same with DICOM storage.
(2) In the Send To dialogue box, select a DICOM print server (For the dialogue box,
please refer to DICOM Storage).
(3) Click [OK] to send print task.
◼ To send images by shortcut key
You can send image to DICOM print server while saving it to hard drive by shortcut key.
(1) Define the short key:
a) Enter “[Setup] → [System Preset] → [Key Config]”.
b) Assign functions to the desired keys: in Key Config page, select a free key or
footswitch at the left side, then select the corresponding function on the right
side.
c) Click [Save] to confirm the preset.
(2) Set a default printer server
a) Enter “[Setup] → [DICOM Preset] → [DICOM Service]”.
b) Click [Print] to open the Print page.
c) Select a Print server in the Service List and click [Default]; you can see “Y” is
marked in the Default column.
d) Click [Exit] to exit the page and return to Setup menu, then click [Save] on the
Setup menu to make the preset to take effect.
(3) Press the defined shortcut key, the system captures the current screen and sends it
to the print server.
10.3.3 DICOM Worklist
After successfully connected DICOM Worklist server with ultrasound system, you can query
patient records from Worklist server, and then import the desired information to your system.
◼ To query patient information via Worklist server:
(1) Press <Patient> to enter Patient Info screen.
(2) Click [WorkList] to enter the WorkList page.
To Next Page
Loading...
