Mindray DP-20 - Image

11-4 Setup
Type
Item
Description
Exam Setup
Status after exam
ends
Select to enter the imaging scanning, patient info or the
Worklist after ending an exam.
Display
Color temperature
Cold/ Warm
Brightness/Contrast
Load Factory
Load the factory data of the display brightness and
contrast.
11.1.3 Image
Open the Image Preset page via [Setup]-> [System Preset]-> [Image], as shown in the figure
below.
Type
Item
Description
Reset Config
Probe
To set the default probe model for the system.
Freeze
Config
Status after Freeze
To set the system status after image is frozen.