EasyManua.ls Logo

Mindray DP-20 - Precautions; Installing and Removing the Batteries

Mindray DP-20
205 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
13-2 Battery
The model of the chargeable lithium-ion battery (hereinafter called battery for short) is
LI23I002A.
NOTE:
Only use the specified batteries.
13.2 Precautions
1. Before using the battery, carefully read the description in the label on the surface of the
battery.
2. When you use the battery at the first time and find that it is dirty or emit an odor, do not
use it.
3. Do not expose the battery to heat sources or high pressure.
4. Do not leave the battery in direct sunlight.
5. Store the battery out of the reach of children. Store the battery out of the reach of
children.
6. The battery is designed to be charged only in this system; charge the battery only when
the ambient temperature is between 0 and 40 .
7. When the battery is out of power, please charge it immediately.
8. Do not knock the battery.
13.3 Installing and Removing the Batteries
WARNING:
Turn off the system and disconnect the adapter from the
main unit before installing or removing batteries. DO NOT
install or remove batteries when the system is turned on or
the system is turned off but the adapter is connected with
the system.
The battery is put in the battery bays at the back side of the system. You can install or
remove it when the system is turned off and the power cord is disconnected from the main
unit.
To install the battery:
1. Turn off the unit and detach the power cord from the main unit.
2. You can see a battery bay at the back of the system. (Note that the battery shall be put
in correct direction). Put the battery into the bay and push to the right side until its tightly
locked.
3. Close the battery cover.

Table of Contents

Related product manuals