Mindray DP-20 - General Measurements; M General Measurements

7-2 Measurement
7.2 General Measurements
7.2.1 2D General Measurements
2D general measurements refer to general measurements on 2D mode:
Measurement Tools
Function
Distance
Measures the distance between two points of interest.
Depth
The distance between probe surface and the probing point along
ultrasound beam.
Angle
The angle between two intersected planes.
Area
Measures the area and perimeter of a closed region.
Volume
The volume of a target.
Cross Line
The length of two line segments, which are perpendicular to each
other.
Parallel Line
The distance between each pair of parallel lines in a sequence.
Trace Length
Measures the length of a curve on the image.
Double Dist
Measures the length of two line segments, which are perpendicular to
each other.
Distance Ratio
Measures the lengths of any two line segments and the calculated
ratio.
Area Ratio
The areas of any two regions and the calculated ratio.
B Histogram
The grayscale distribution of ultrasonic echo signals in a closed
region.
B Profile
The grayscale distribution of ultrasonic echo signals across a line.
7.2.2 M General Measurements
M general measurements refer to general measurements on M mode. The measurements
listed below can be performed:
Measurement
Tools
Function
Distance
The vertical distance between two points.
Time
The time interval between any two points.
Slope
Measures the distance and time between two points and calculates the
slope.
HR
Measures the time of n (n≤8) cardiac cycles and calculates the heart rate in
M mode image.
Velocity
Calculates the average velocity by measuring the distance and time
between two points.