12-32 Probes and Biopsy
⚫ Relative humidity: 30% to 95% (no condensation)
12.2.9 Disposal
Be sure to dispose the needle-guided bracket only after sterilizing it.
Contact your MINDRAY representative when disposing of this device.
12.3 Lithotrity
“Lithotrity” helps to locate the focus point of lithotrity wave during lithotrity treatment. By
watching the procedure of lithotrity in real-time and adjusting the intension and frequency of
the lithotrity wave, the harm to the patients can be reduced to the least.
◼ To enter lithotrity mode: Click [Lithotrity] in the image menuto turn on the lithotrity.
◼ In lithotrity mode:
⚫ The lithotrity line is a vertical dotted line located in the middle of the screen, the
position and direction of which cannot be changed.
⚫ The lithotrity mark is a “×” mark located on the lithotrity line which can be moved up
and down along the lithotrity line by rolling the track ball.
⚫ The depth of the mark is displayed in the image parameter area of the screen.
To Next Page
Loading...
