8-2 Comments and Body Marks
comment adding. When clicking [Home], the cursor will turn to the default setting
position.
◼ Change Font Size/Arrow Size
⚫ Click [Font Size] to change the font size of comment: Small, Mid, Big.
⚫ Click [Arrow Size] to change the arrow size of comment: Small, Mid, Big.
◼ ABC Display
Click [ABC Display] to display or hide the added comments. Assign the user-defined key
for the function in “[Setup]-> [System Preset]->“Key Config” ”.
◼ Set comment language
Click [English] to turn on or off the English comments. If “English” is turned on, the
comments will display in English; if turn off, the comments will display in the language
you set.
If the current language is English, this selection is not available.
◼ Custom
Click [Custom] to display the dialog box containing all comments in current menu, you
can add, remove or edit the comment.
8.1.3 Adding Comments
The system can be configured with comment text libraries including Abdomen, Cardiology,
GYN (Gynecology), OB (Obstetrics), Urology, SMP (Small Part), Vascular, PED (Pediatric)
and Nerve Blocks.
◼ Typing comment characters
1. To set the comment location:
Roll the trackball or press direction-control keys on the keyboard to move the cursor to
the desired location for comments.
2. To type the alphanumeric characters:
⚫ Type the alphanumeric characters through the qwerty (The default characters are
uppercase);
⚫ To type the upper characters, press [Shift] and the character key at the same time.
3. Move to a new line:
In the edit status (the characters are in green color), press <Enter> to move the cursor
to the new line, and the location of the cursor is aligned with that of the first line.
4. In the edit status, move the trackball to confirm the character added, and the color of the
character added turns yellow.
◼ Adding a Comment Text
Move the cursor onto the desired comment text in the menu and press <Set>, and
then the system adds the selected comment text on the set location. The added
comment text is in the edit status, so you can edit the comment text added.
◼ Adding an Arrow
You can add an arrow to a location where you want to pay attention.
1. Press the <Arrow> key, and an arrow will appear at the default position.
2. Adjust the arrow
⚫ Adjust the position and orientation of the arrow: roll the trackball to the desired
position and use the <Rotation> knob to change the orientation in 15° increments.
To Next Page
Loading...
