12-6
The STAT mode initiates 5 minutes of continuous, sequential, automatic NIBP measurements.
WARNING
z Continuous non-invasive blood pressure measurements may cause purpura,
ischemia and neuropathy in the limb with the cuff. Inspect the application site
regularly to ensure skin quality and inspect the extremity of the cuffed limb for
normal color, warmth and sensitivity. If any abnormity occurs, move the cuff to
another site or stop the blood pressure measurements immediately.
12.6 Understanding the NIBP Numerics
The NIBP display shows numerics only as below. Your display may be configured to look
slightly different.
(1) Time of last measurement
(2) Time remaining to next measurement
(3) Measurement mode
(4) Unit of pressure: mmHg or kPa
(5) Systolic pressure
(6) Diastolic pressure
(7) Mean pressure obtained after the measurement and cuff pressure obtained during the
measurement
If the NIBP measurement exceeds the measurement range, “---” will be displayed.
(3)
(4)
(5)
(6)
(7)
(1) (2)
To Next Page
Loading...
Need help?
General
