E-1
E Electrical Safety Inspection
The following electrical safety tests are recommended as part of a comprehensive preventive
maintenance program. They are a proven means of detecting abnormalities that, if undetected,
could prove dangerous to either the patient or the operator. Additional tests may be required
according to local regulations.
All tests can be performed by using commercially available safety analyzer test equipment.
These procedures assume the use of a 601PROXL International Safety Analyzer or equivalent
safety analyzer. Other popular testers complying with IEC 60601-1 used in Europe, such as
Fluke, Metron, or Gerb, may require modifications to the procedure. Please follow the
instructions of the analyzer manufacturer.
The electrical safety inspection should be periodically performed every two years .The safety
analyzer also proves to be an excellent troubleshooting tool to detect abnormalities of line
voltage and grounding, as well as total current loads.
E.1 Power Cord Plug
Test Item Acceptance Criteria
The power plug
The power plug pins No broken or bent pin. No discolored pins.
The plug body No physical damage to the plug body.
The strain relief
No physical damage to the strain relief. No plug
warmth for device in use.
The power plug No loose connections.
The power cord
No physical damage to the cord. No
deterioration to the cord.
For devices with detachable power cords,
inspect the connection at the device.
For devices with non-detachable power cords,
inspect the strain relief at the device.
To Next Page
Loading...
Need help?
General
