Mindray uMEC10 User Manual

2-10
Symbol Label Function
Zero IBP Starts IBP zero calibration.
Alarm Reset Resets the alarm system.
Alarm Pause Pauses or restores alarms.
Screens Changes screen.
Patient Setup
Enters the [Patient Setup] menu.
Minitrends Has a split-screen view of minitrends
Volume Setup
Enters the [Volum e S e tup] menu.
Load Config.
Enters the [Load Configuration] menu.
Start C.O. Starts cardiac output procedure.
Calculations Performs calculations.
Others Has a split-screen view of another patient’s conditions.
oxyCRG Has a split-screen view of OxyCRG trends.
7-lead ECG Enters the full-screen 7-lead ECG screen.
12-lead ECG Enters the full-screen 12-lead ECG screen.
Parameters
Enters the [Parameters] menu.
NIBP STAT Starts NIBP STAT measurement.
Print Setup
Enters the [Unit Setup] menu.
Unit Setup
Enters the [Unit Setup] menu.
Privacy Mode Enters the privacy mode.
Night Mode Enters the night mode.

Mindray uMEC10 Specifications

General

Resolution	800 x 600
ECG	3/5-lead ECG
EtCO2	Optional
Battery	Rechargeable lithium-ion
Battery Life	4 hours
Dimensions	110 mm
Alarm	Audible and visual alarms
Power Supply	AC 100-240V, 50/60Hz
Agent	No
O2	No