3-16
DRIVE-CONTROL
COMPONENTS
-
Power Steering
POWER
STEERING
All models come standard with an engine speed
sensitive power steering system.
N73ZEOCjAA
‘d
FEATURES
Engine speed sensitive power steering
N73ZEOTAA
1.
Impact absorption mechanism
2. Supplemental Restraint System (SW)
Double-lip oil seals used in power cylinder
l
The
4-spoke
type steering wheel with SRS unit
l
is adopted on all models.
The steering system uses a vane oil
pump.with
[For information on the SRS, refer to the “Interior
fluid flow control system.
l
-
Supplemental Restraint System
(SRS)”
sec-
The steering gear and linkage system is highly
tion.]
reliable integral rack and pinion type which
fea-
tures light weight and compact size.
l
The steering column incorporates both a shock
.’
absorbing mechanism and a tilt steering mecha-
‘d
nism.
SPECIFICATIONS
Items Non-turbo
Turbo
Steering wheel maximum turns
2.41
Steering angle (vehicle in unladen)
Inner wheel
32”30’
+
2”
Outer wheel
27”OO
Steering gear and linkage
Type
Integral type
Gear type
Rack and pinion
Gear ratio
00
(infinity)
Rack stroke
mm (in.)
124 (4.9)
Oil pump type
Vane type with fluid flow
Vane type with fluid flow
control system
Displacement
cm3/rev.
(cu.in./rev.)
control system
10.5
(.64)
9.6
(.59)
Relief set pressure
MPa
(psi.)
8.8 (1,277) 8.8 (1,277)
To Next Page
Loading...
Need help?
General
