Mitsubishi ECLIPSE Technical Information Manual

EQUIPMENT - ETACS
IGNITION KEY REMINDER ALARM FUNCTION
1. When the ignition key is left inserted with the
ignition switch in the OFF or ACC position, the
H signals of the key reminder switch and the
ignition switch inverted by NOT1 are input to
by NOT2 and the H signal output from AND1
are input to AND2. Then AND2 outputs H signal
to cause the detector circuit to operate.
3.
ANDi. As a result, AND1 outputs H signal.
The buzzer output causes the transistor to be
2.
When the driver’s door is opened (door switch
alternately ON and OFF, and the buzzer sounds
ON), the H signal of the door switch inverted
intermittently to remind the driver that the ignition
key has not been removed.
ETACS-EC1
Fusible link
Ignition switch (IGl)
3
ANDz
Detection circuit
8
NOTI
4NDl
Ignition
switch
gFForACC/
Key
~w~~~r
(Key removed) ON
(Key inserted) OFF
n
Driver’s
door
switch
Buzzer
output
(Buzzer sounds)
Driver’s door
switch
I
(Key inserted)
Key
reminder
switch
k(
Key removed)
=
16x0883

Mitsubishi ECLIPSE Specifications

General

Brand	Mitsubishi
Model	ECLIPSE
Category	Automobile
Language	English