Mitsubishi FX3G Series User Manual

8 Installation In Enclosure
8.6 Connecting Methods for Main Unit and Extension Devices
96
FX3G Series Programmable Controllers
User's Manual - Hardware Edition
8.6 Connecting Methods for Main Unit and Extension Devices
This section explains the connecting methods for extension devices.
8.6.1 Connection of extension devices
The connecting method varies depending on the combination of the products, i.e. the main unit, expansion
board, special adapters, input/output extension blocks and special function blocks.
The connecting methods are explained with the following configuration examples.
Example of configuration
Extension cable
·FX
0N-65EC
·FX
0N-30EC
Special
adapter
FX3G Series
main unit
FX -
CNV-BC
FX2N Series
Input/output powered
extension unit
Connector
conversion
adapter
FX2N/FX3U
Series
extension blocks
FX
2N Series input/output
powered extension unit
Expansion
board
Connecting
method F
Connecting
method G
Connecting
method H
Connecting
method C
Connecting
method B
Connecting
method A
Connecting
method D
Connecting
method E
FX2N/FX3U
Series
extension blocks
FX
2N/FX3U
Series
extension blocks
2N

Mitsubishi FX3G Series Specifications

General

Model	FX3G Series
Power Supply	AC 100-240V or DC 24V
Program Capacity	32, 000 steps
Execution Speed	0.21 µs/basic instruction
Communication Options	RS-422, USB, Ethernet
Expansion Modules	Analog, digital, communication
Programming Language	Ladder Logic, Instruction List
Built-in Functions	High-speed counters, pulse output
Analog I/O	Available via expansion modules