Mitsubishi Q Series User Manual

6 - 7 6 - 7
MELSEC-Q
6 PROGRAMMING
(d) Execution of auto tuning in the [Monitor/test] setting of [Online] menu (Refer
to Section 5.6)
Auto tuning is executed in the procedure shown on the screen.
CH1 Automatic Backup Setting after AT of PID Constants ............"Yes"
After completing auto tuning, change the following setting items.
• Operation mode command: [Operation mode] to [Setting mode]
• CH1 Auto tuning: [Start] to [Stop]

Mitsubishi Q Series Specifications

General

I/O Points	Up to 4096 points
Communication	Ethernet, RS-232, RS-485
I/O Modules	Digital, Analog, Specialized
Programming Language	Function Block Diagram, Structured Text
Power Supply	24V DC, 100-240V AC
Operating Temperature	0°C to 55°C
Shock Resistance	147 m/s2 acceleration, 3 times in each of X, Y, and Z directions
Program Capacity	Up to 252K steps