V5A51 -
Countershaft Gear
23E-18-1
18. COUNTERSHAFT GEAR
DISASSEMBLY AND ASSEMBLY
1
2
3
4
5
6
Apply gear oil to all
moving parts before
installation.
Disassembly steps
A
A
""
C
A 1. Ball bearing
"
B
A 2. Snap ring
A
B
""
A
A 3. Spacer
A
B
""
A
A 4. Roller bearing
A
B
""
A
A 5. Inner race
6. Countershaft gear
DISASSEMBLY SERVICE POINTS
A
A
"
BALL BEARING REMOVAL
Use the special tool to remove the ball bearing.
A
B
"
SPACER / ROLLER BEARING / INNER RACE
REMOVAL
1. Remove the spacer and roller bearing.
2. Using the special tool, remove the inner race.
NOTE
The removal sequence of roller bearing parts vary
depending on the direction that the roller bearing was
installed. In some cases, t he inner race, roller bearing
and spacer may have to be simultaneously removed.
AddedPWEE8920-I
E
Mar. 2000Mitsubishi Motors Corporation
MD998801
MD998368
MD998801