V5A51 -
Transmission and Transfer
23E-3-1
3. TRANSMISSION AND TRANSFER
DISASSEMBLY AND ASSEMBLY
35
±
6Nm
1
2
3
4
5
6
48
±
6Nm
48
±
6Nm
35
±
6Nm
Disassembly steps
1. Transfer
2. Cable end bracket
3. Harness bracket
4. Harness bracket
"
A
A 5. Transfer case adapter
6. T ransmission
ASSEMBLY SERVICE POINT
"
A
A
TRANSFER CASE ADAPTER INSTALLATION
After squeezing out and applying sealant on the transfer case
adapter at the section indicated in the illustration, install onto
the transmission case.
Specified sealant:
MITSUBISHI genuine sealant part No. MR166584 or
equivalent
Caution
D
Evenly squeeze out and apply the sealant so that
it is not excessive and does not ooze out.
AddedPWEE8920-I
E
Mar. 2000Mitsubishi Motors Corporation
3mm
diameter