18
2 Basic Operations
No. 99MAM029A
Tips
When printing the measurement value measured with the measuring instrument with Digimatic
output other than the Digimatic Caliper, follow the basic procedure described below.
• Before the measurement
1
Connect to the measuring instrument with Digimatic output via a Digimatic connection
cable in the power off state.
2
Turn on the power of the measuring instrument with Digimatic output.
3
Turn on the product power.
• After the measurement
1
Turn off the product power.
2
Turn off the power of measuring instrument with Digimatic output.
3
Detach the Digimatic connection cable from the product and the measuring instrument with
Digimatic output.
To Next Page
Loading...