40
3 Advanced Operations and Useful Functions
No. 99MAM029A
2
Press
DATA
.
» "2 SYSTEM MODE : DP-1" is printed.
3
Press
STAT.
OUT LOG
.
» "2 SYSTEM MODE : MP" is printed.
4
After pressing
DATA
until "19 INPUT
AXIS" is printed, set the data input
object axes.
» "19 INPUT AXIS : X Y Z" and setting
methods are printed.
Tips
To specify and release are possible for X
axis with
PRINTER
, Y axis with
CLEAR
and Z
axis with
CANCEL
and possible to set multiple
axes.
5
After pressing
DATA
once, set the cal-
culation object axes.
» "20 CUL AXIS : X" and setting meth-
ods are printed.
Tips
This setting is for the statistical calculation result printing. Only one axis can be calculated.
For further details on the statistical calculation printing, refer to
"2.4 Printing the Statistical
Calculation Value" on page 24.
6
Press
DATA
once.
» The parameter settings list is printed.
» The parameter settings are completed.
2
Turn off the product power.
Press
POWER
until the power LED is off.
Light is off
POWER
TOL.
REC/STOP
PRINTER
CLEAR
STAT.
OUT LOG
CANCEL
DATA
FEED
To Next Page
Loading...
General