MKN SpaceCombi Team - Page 36

Operating the unit
36 Operating instructions
Basic setting parameters
The unit is already preset, when it is delivered. The values in the
following list can be adjusted at the parameter level.
Basic setting Parameter
s
Standard
value
Adjustment
range
Explanation
Screen lock
Screen lock 662 0 0 = Deactivated
1 = Activated
Activate or deactivate the screen lock. The
screen lock switches itself on after a
certain time, if there have been no more
inputs on the touchscreen.
Password 7 111 0 — 300 The password for the basic settings can be
changed in this range.
Cooking modes
Preselect steaming
temperature
9 100 30 °C — 130 °C Preset the temperature for steaming
Preselect
Combisteaming
temperature
10 150 30 °C — 250 °C Preset the temperature for Combisteaming
Preselect Convection
temperature
11 180 30 °C — 250 °C Preset the temperature for Convection
Preselect
regeneration
temperature
12 130 30 °C — 180 °C Preset the temperature for regeneration
Ready2Cook
Ready2Cook active 607 1 0 = Not activated Indicates whether the default setting is
activated or not.
1 = Activated
Ready2Cook
preheating
temperature
4 15 0 — 30% If the unit is fully loaded with a large mass
(roasts, loaves of bread), increase the
preheating temperature, so that the
cooking zone temperature does not drop
too suddenly.
Cooking
SES: Use at the end
of the cooking
program
624 1 0 = Deactivated
1 = Activated
Default setting for Steam Exhaust System
if new cooking programs are being created
Query message:
Restart after
interruption of
cooking program
697 0 0 = No query
1 = Query only
with AutoChef
2 = Query always
activated
Setting for behaviour after interruption of
the cooking program
Adopt changes after
end of cooking
program
696 0 0 = Do not adopt
1 = Adopt
Automatically save changes made at the
end of a cooking program.
4127003--0ABBE-E