Operating the unit
73Operating instructions
4. Set the letters of the name you are searching for using the
keypad.
A filtered list is displayed in the
Results
display.
5. Tap on field with the name you are searching for.
Cooking program is selected and loaded.
Cooking program steps are displayed.
Cooking program is open.
4.10.3 Starting the cooking program
The current step in the cooking program is highlighted. Upon
completion, the following step automatically appears in the
display.
Requirement Cooking program open
1. Tap the "START" button in the information bar.
The cooking program starts.
The "START" button in the information bar changes to the
"STOPP" button.
The remaining cooking program time is displayed in the
"STOPP" button.
The cooking program is started.
4.10.4 Ending the cooking program
Requirement Cooking program started
Cooking program time has not elapsed
1. Tap the "STOPP" button in the information bar.
or
2. Wait for the cooking time to end.
Cooking program has ended.
The "STOPP" button in the information bar changes to the
"START" button
The cooking program has ended.
If the cooking zone door is not opened, the fan continues to run
at a low speed at intervals. This achieves even cooking.
If the current cooking process is stopped manually, a window
appears under certain circumstances with
Cooking program has
been interrupted
.
You then have the opportunity to end or continue the cooking
program.
4127003--0ABBE-E
To Next Page
Loading...
