Cleaning and caring for the unit
86 Operating instructions
3. Tap the
Confirm
button.
The
Cleaning level selection
window is displayed.
4. Tap the "Start Stop" button.
If necessary, the cooking zone is cooled down until the
cleaning temperature of 60 °C
is reached.
5.9.3 Inserting the cleaning cartridge
Use only cleaning cartridges with an undamaged wax seal.
If the wax seal is damaged, the cleaner can enter the cleaning
circuit prematurely or not dissolve completely, so that complete
cleaning is no longer assured.
Insert the cleaning cartridges only when requested to do so.
Never operate the unit in the automatic cleaning mode without a
cleaning cartridge.
Image: Wax seal on the cleaning cartridge damaged
Image: Insert the cleaning cartridge in the holder
Requirements Cleaning cartridge sealed and undamaged
1. Open the cooking zone door.
2. Open the lid of the cleaning cartridge.
3. Insert the cleaning cartridge into the holder on the air diverter.
4. Close the cooking zone door.
4127003--0ABBE-E
To Next Page
Loading...
