MKN SpaceCombi Team - Inserting and Removing a USB Flash Drive; Preparing a USB Flash Drive for Importing and Exporting

Operating the unit
59Operating instructions
4.6.19 Inserting and removing a USB flash drive
Inserting a USB flash drive
Requirement USB flash drive with a minimum of 2 GB and maximum of 32 GB
available storage capacity (not included with delivery)
USB flash drive not write-protected
Insert the USB flash drive.
The USB flash drive is ready after at most 20 seconds.
Removing the USB flash drive
Requirement Exporting or importing of data completed
Remove the USB flash drive.
4.6.20 Preparing a USB flash drive for importing and exporting
Requirement USB flash drive is formatted
USB flash drive is not write-protected
1. Create folder structure for importing and exporting.
2. Create "autoChefImages" folder name.
Data exchange of photos in PNG format, resolution 249x111
pixels.
3. Create "FCBrowserFiles" folder name.
Data exchange of texts in HTML format.
4. Create "FCImport" folder name.
Data exchange of Cookbooks.
5. Create "MMIContent" folder name.
Import data exchange of additional content.
6. Create "MMiUpdate folder name.
Data exchange of update files.
Once the folder structure has been completed, the USB flash drive
is ready for use.
4127003--0ABBE-E