Configuration and Troubleshooting
2-92 Manual # 42-02-2P26
Waiting for In-Car Sw (443) Informational. The car is at a recall floor with doors open awaiting activa-
tion of the current mode of operation in-car switch.
Warning: Flts Bypassed (266) FAULTS ARE BEING BYPASSED. The fault bypass jumper on the SCE-CPU
board is in the BYPASS position and Utilities > Fault Bypass is enabled for
the active mode of operation (UTILS > Construct and Bypass Faults).
Table 2.15 Touch Screen Event Listings
Event Description
To Next Page
Loading...