Chapter 5
| SNMP Commands
Notification Log Commands
– 155 –
show nlm oper-status This command shows the operational status of configured notification logs.
Command Mode
Privileged Exec
Example
Console#show nlm oper-status
Filter Name: A1
Oper-Status: Operational
Filter Name: A2
Oper-Status: Operational
Console#
show snmp
notify-filter
This command displays the configured notification logs.
Command Mode
Privileged Exec
Example
This example displays the configured notification logs and associated target hosts.
Note that the last entry is a default filter created when a trap host is initially created.
Console#show snmp notify-filter
Filter profile name IP address
---------------------------- ----------------
A1 10.1.19.23
A2 10.1.19.22
traphost.1.1.1.1.private 1.1.1.1
Console#
To Next Page
Loading...
Need help?
General
