Chapter 22
| CDP Commands
– 519 –
cdp transmit-interval This command specifies the periodic transmission interval for CDP advertisements.
Use the no form to restore the default setting.
Syntax
cdp transmit-interval seconds
no cdp transmit-interval
seconds - The interval at which the switch send CDP updates.
(Range: 5-254 seconds)
Default Setting
60 seconds
Command Mode
Global Configuration
Example
Console(config)#cdp transmit-interval 120
Console(config)#
cdp version This command specifies the CDP version to use for transmitting advertisements.
Use the no form to restore the default setting.
Syntax
cdp version {1 | 2}
no cdp version
1 - CDP version 1.
2 - CDP version 2.
Default Setting
Version 2
Command Mode
Global Configuration
Example
Console(config)#cdp version 1
Console(config)#