Motorola EX-3524 - Show Users; Table 11: Show System - Display Description

Chapter 4 | System Management Commands
System Status
– 87 –
show users Shows all active console and Telnet sessions, including user name, idle time, and IP
address of Telnet client.
Default Setting
None
Command Mode
Normal Exec, Privileged Exec
Command Usage
The session used to execute this command is indicated by a “*” symbol next to the
Line (i.e., session) index number.
Example
Console#show users
User Name Accounts:
User Name Privilege Public-Key
--------- --------- ----------
motorola 15 None
guest 0 None
steve 15 RSA
Online Users:
Line Username Idle time (h:m:s) Remote IP addr.
----------- -------- ----------------- ---------------
0 console motorola 0:14:14
* 1 VTY 0 motorola 0:00:00 192.168.1.19
Table 11: show system – display description
Parameter Description
System Description Brief description of device type.
System OID String MIB II object ID for switch’s network management subsystem.
System Up Time Length of time the management agent has been up.
System Name Name assigned to the switch system.
System Location Specifies the system location.
System Contact Administrator responsible for the system.
MAC Address MAC address assigned to this switch.
Web Server/Port Shows administrative status of web server and UDP port number.
Web Secure Server/Port Shows administrative status of secure web server and UDP port
number.
Telnet Server/Port Shows administrative status of Telnet server and TCP port number.
Jumbo Frame Shows if jumbo frames are enabled or disabled.
System Fan Shows the status of the system fans.
POST Result The POST results should all display “PASS.” If any POST test indicates
“FAIL,” contact your distributor for assistance.