2 - 26 MC9500-K Series Mobile Computer Integrator Guide
Figure 2-36
DC “Y” Cable Connected to Single Bay USB Cradle and Single Slot Battery Charger
3. Plug the AC line cord into the power supply.
4. Plug the AC line cord into an outlet.
Use the DC “Y” Cable to power two Single Slot Battery Chargers.
1. Connect the power supply DC line cord to the female jack of the DC “Y” cable.
2. Connect each power plug of the DC “Y” cable to the power ports on the Single Slot Battery Charger.
Figure 2-37
DC “Y” Cable Connected to Two Single Slot Battery Chargers
3. Plug the AC line cord into the power supply.
4. Plug the AC line cord into an outlet.
To Next Page
Loading...
