119 Rev. 01/2015
11.1 Maintenance Instructions
Please follow the following maintenance instructions:
– If you are using a passive (magnet) pickup, clean it at regular intervals.
– Check the ignition wires at regular intervals.
– Replace the pickup at regular intervals if operated under elevated temperature conditions
(>90 ° C / >194 °F).
– Regularly inspect all wires of the ignition system for damage and replace the wires as
needed.
– Check all plug-in connections for proper condition.
– Service the spark plugs as per the instructions of the spark plug and engine manufacturers.
– Use only a damp cloth to clean the ignition controller. Do not use a high-pressure device or
similar.
11.2 Spare Parts and Accessories
For spare parts and accessories for MIC500 ignition systems, please refer to our current product
guide, which is available for download at www.motortech.de.
11 MAINTENANCE
To Next Page
Loading...