Motortech MIC500 - Which Abbreviations;Acronyms Are Used in the Operating Manual

1 GENERAL INFORMATION
8 Rev. 01/2015
Danger
This symbol indicates warnings for danger to life, especially due to high
voltage. Read these warning notices carefully and take the mentioned
precautionary measures.
1.4 Which Abbreviations/Acronyms Are Used in the Operating Manual?
In the manual or the user interface, the following abbreviations / acronyms are used:
Abb. Term Description Explanation
ADV Advance Advanced with respect
to top dead center
Indicates the direction for
timing
ATDC After Top Dead Center After top dead center
BTDC Before Top Dead
Center
Before top dead
center
CE Conformité
Européenne
Conformity with EU
directives
Mark based on EU legislation
for certain products in
conjunction with product safety
°crank-
shaft
Degree crankshaft Unit for the rotation angle of
the crankshaft
CSA Canadian Standards
Association
Organization that defines
standards, inspects products
for safety compliance, and
issues pertinent certifications.
DC Direct Current Direct current
EMC Electromagnetic
Compatibility
Compatibility of electrical or
electronic equipment items
with their surroundings
LED Light Emitting Diode Light emitting diode Light emitting electronic semi-
conductor
POT Potentiometer Continuously adjustable
potential divider
PWR Power Output / current Operating voltage
RET Retard Retarded with respect
to the top dead center
Indicates the direction for
timing